How To Stretch A Banner

Table of contents:

How To Stretch A Banner
How To Stretch A Banner
Anonim

Banner is one of the most popular and effective types of outdoor advertising. A bright and large banner attracts attention and arouses the interest of potential customers, the number of which any company strives to increase. When installing a banner, it is important that it is securely fixed and performs its function for the required amount of time.

How to stretch a banner
How to stretch a banner

It is necessary

  • - banner;
  • - a tool for punching eyelets;
  • - eyelets;
  • - cable or construction clamps;
  • - metal pipe;
  • - double-sided adhesive tape or glue.

Instructions

Step 1

Examine the place where you are going to attach the banner. It often happens that the way the banner fabric is stretched depends on the possibilities of this place. Think about which parts of the facade, pipe, fence, etc. it will be most convenient to fix outdoor advertising.

Step 2

One of the most common tensioning methods is with eyelets. Eyelets are metal rings that are attached to banner fabric. Available in 24, 32 and 40 mm diameters. For this method, punch holes for eyelets at a distance of 20-30 cm around the edge of the banner, after bending the edges. With this distance, there will be no unnecessary tension and, at the same time, the fabric will not fall through. The size of the folded edge depends on the size of the canvas and the diameter of the eyelets. Thus, punching is carried out through two layers of fabric.

Step 3

Punch holes for corner eyelets in the place where the longitudinal and transverse edges of the canvas intersect, that is, through four layers.

Step 4

Insert the eyelets into the holes and pull the cable through them. Tie a cable to the advertising surface. Instead of a cable, it is possible to use construction clamps (plastic or metal), which are threaded into each eyelet and attached to the advertising surface separately. Plastic ones are less durable, but if you need the banner to hang for 2-3 days, then it will be quite enough.

Step 5

If the place of the banner attachment provides for high mechanical loads on the canvas (for example, strong gusts of wind), then fix the corner attachments additionally. In the same case, use additional fixation of the banner with a metal pipe. To do this, fold the edge of the canvas and glue it in such a way that a pocket is formed. Use special glue or double-sided tape with high adhesion. Insert the pipe into the pocket and fix it on the advertising surface.

Recommended: