Absolutely all consumer waste is suitable for recycling. However, not all of them are processed due to the high cost of processing equipment or other factors. However, you can also recycle paper at home. So, let's figure out how to recycle paper into lumpy egg pads.
Instructions
Step 1
Divide your waste paper into groups, taking into account the type of product (cardboard or paper), composition (wood or cellulose), color (light, dark, white, etc.), dissolution rate in water, etc. For making a box for eggs unnecessary newspapers will do.
Step 2
Proceed with dissolving the paper by placing it in a special solution. To do this, you need to take water, to which you need to add a special 6% hydraulic thinner. Under the influence of these materials, the paper is completely shredded and separated into fibers.
Step 3
Strain the resulting mass through a sieve so that the remaining water does not interfere with the further processing process. In this case, the pulp should be filtered in two stages - first through a coarse sieve, and then through a fine one.
Step 4
Clean the resulting mass from pieces of wood and other substances. Prepare a solution of wax, paraffin and glue in equal proportions. Add the strained paper fibers to the warm mass, then mix the resulting mass thoroughly.
Step 5
Take the plastic egg pockets. These grooves can be purchased at a hardware store or simply removed from the refrigerator. Treat the mold with sunflower oil on the side that is placed on the table, that is, the mold should stand with egg indentations downward. In this case, you should apply oil to a cotton swab and just smear the mold.
Step 6
Pour the resulting mass onto the mold and place in a cool place for 30 minutes. After that, separate the frozen form from the one that you took to help. The egg tray is ready - you can safely lay eggs in it or distribute such a creation to your friends and relatives. Such a product is especially useful for people raising chickens and geese. If desired, you can add food coloring to the mass obtained for solidification in order to give the tray a certain color.
